I have been given a Maslow CNC, with no upgrades. The work I do needs to use the full sheet. So when the sled reaches the far bottom corners left or right the sled loses accuracy, because the angle is not great enough on the chain directly above to pull it tight against the opposing chain. Can I try adding weight? Change out the top bar to the 12' bar? Do yall have other suggestions? Thank you

  • Hey Adam, the original Maslow has issues with accuracy in the corners. It's one of the limitations to the design. Adding a 12ft top beam and 15ft chains will help make the accuracy better though! You will also have to raise the 12ft beam about 6 inches.

    Here's a great explanation of why from the Maslow forum!

  • Thank you for this.

Login or Signup to post a comment

Didn't find what you were looking for?

Start a new topic